Here's the page we think you wanted. See search results instead:

Keysight offers a wide array of Probes and Probe accessories for your specific testing application. Our Probe accessories offer extremely low input capacitance, flat frequency response and superior signal fidelity. Also available are single-ended connectivity kits that contain a variety of connectivity probe heads and accessories.

AC / DC Current Probes

1146B AC / DC Current Probe, 100 kHz, 100 A

1146B AC / DC Current Probe, 100 kHz, 100 A

Obtain accurate display and measurement of currents up to 100 A DC or peak AC, DC to 100 kHz, without breaking the circuit.

1147B AC/DC Current Probe, 50 MHz, 15A

1147B AC/DC Current Probe, 50 MHz, 15A

Use to capture transient current signals such as those found in motor controllers, switching power supplies, and more.

34134A DC Coupled Current Probe

34134A DC Coupled Current Probe

Measure a wide range of applications with this battery-powered, clamp-on probe; use with DMMs or voltmeters

N2779A Power Supply for N2780-83A / B Current Probe

N2779A Power Supply for N2780-83A / B Current Probe

Connect up to three N2780 series current probes to a single power supply, enabling effective three-phase power measurements.

N2780B AC / DC Current Probe, 2 MHz, 500 Arms

N2780B AC / DC Current Probe, 2 MHz, 500 Arms

Take accurate measurements with a hybrid technology that includes a Hall effect sensor and an AC current transformer.

N2781B AC / DC Current Probe, 10 MHz, 150 Arms

N2781B AC / DC Current Probe, 10 MHz, 150 Arms

Take accurate measurements with a hybrid technology that includes a Hall effect sensor and an AC current transformer.

N2782B AC / DC Current Probe, 50 MHz, 30 Arms

N2782B AC / DC Current Probe, 50 MHz, 30 Arms

Take accurate measurements with a hybrid technology that includes a Hall effect sensor and an AC current transformer.

N2783B AC / DC Current Probe, 100 MHz, 30 Arms

N2783B AC / DC Current Probe, 100 MHz, 30 Arms

Take accurate measurements with a hybrid technology that includes a Hall effect sensor and an AC current transformer.

N2820A AC/DC Current Probe (2-Channel), 3 MHz, 50 uA

N2820A AC/DC Current Probe (2-Channel), 3 MHz, 50 uA

Provides simultaneous high- and low-gain views of the current waveform for more precise wide dynamic range measurements.

N2821A AC/DC Current Probe (1-Channel), 3 MHz, 50 uA

N2821A AC/DC Current Probe (1-Channel), 3 MHz, 50 uA

Engineered for high dynamic range, high-sensitivity measurements to meet challenging current measurement needs.

N2893A AC/DC Current Probe, 100 MHz, 15A

N2893A AC/DC Current Probe, 100 MHz, 15A

Remove any residual magnetism and unwanted DC offset in the probe with auto demagnetization (degauss) and calibration.

N7026A AC/DC High Sensitivity Clamp-On Current Probe

N7026A AC/DC High Sensitivity Clamp-On Current Probe

Measure down to 1 mA/div, giving you a much more accurate view of low-level signals.

N7040A Rogowski AC Current Probe, 23 MHz, 3000 A

N7040A Rogowski AC Current Probe, 23 MHz, 3000 A

Obtain current measurement in the most difficult-to-reach parts and confined spaces of a circuit under test

N7041A Rogowski AC Current Probe, 30 MHz, 600 A

N7041A Rogowski AC Current Probe, 30 MHz, 600 A

Obtain current measurement in the most difficult-to-reach parts and confined spaces of a circuit under test

N7042A Rogowski AC Current Probe, 30 MHz, 300 A

N7042A Rogowski AC Current Probe, 30 MHz, 300 A

Obtain current measurement in the most difficult-to-reach parts and confined spaces of a circuit under test.

Active Probes

41800A Active Probe, 5 Hz To 500 MHz

41800A Active Probe, 5 Hz To 500 MHz

Provides high-input impedance and can be used with a network and spectrum analyzer for circuit signal analysis.

N2795A Active Probe, 1 GHz

N2795A Active Probe, 1 GHz

Ideal for digital system design, component design/characterization, and educational research applications.

N2796A Active Probe, 2 GHz

N2796A Active Probe, 2 GHz

Ideal for digital system design, component design/characterization, and educational research applications.

N2797A Extreme Temperature Active Probe, 1.5 GHz

N2797A Extreme Temperature Active Probe, 1.5 GHz

Use for extreme temperatures ranging from -40 °C to +85°C without compromising measurement performance.

N7010A Active Termination Adapter, 30 GHz

N7010A Active Termination Adapter, 30 GHz

Address applications such as HDMI 2.0, DisplayPort and MIPI M-PHY Gear 3/4 with this single-ended adapter

Adapters

10229A Hook Tip Adapter

10229A Hook Tip Adapter

Use this retractable hook tip adapter with the 85024A high-frequency probe

E2613A 0.5 mm Wedge Probe Adapter for TQFP and PQFP, 3-Signal

E2613A 0.5 mm Wedge Probe Adapter for TQFP and PQFP, 3-Signal

Safely connect to surface mount ICs and avoid shorting pins with this mechanically noninvasive adapter

E2614A 0.5 mm Wedge Probe Adapter for TQFP and PQFP, 8 signal

E2614A 0.5 mm Wedge Probe Adapter for TQFP and PQFP, 8 signal

Safely connect to surface mount ICs and avoid shorting pins with this mechanically noninvasive adapter

E2615A 0.65 mm Wedge Probe Adapter for TQFP and PQFP, 3-Signal

E2615A 0.65 mm Wedge Probe Adapter for TQFP and PQFP, 3-Signal

Safely connect to surface mount ICs and avoid shorting pins with this mechanically noninvasive adapter

E2616A 0.65 mm Wedge Probe Adapter for TQFP and PQFP, 8-Signal

E2616A 0.65 mm Wedge Probe Adapter for TQFP and PQFP, 8-Signal

Safely connect to surface mount ICs and avoid shorting pins with this mechanically noninvasive adapter

E2644A 0.65 mm Wedge Probe Adapter for TQFP and PQFP, 16-Signal

E2644A 0.65 mm Wedge Probe Adapter for TQFP and PQFP, 16-Signal

Safely connect to surface mount ICs and avoid shorting pins with this mechanically noninvasive adapter

MX0103A Bullet Adapter

MX0103A Bullet Adapter

Expand your measurement capabilities by connecting the MX0100A probe head to an InfiniiMax probe amplifier.

N2744A T2A Probe Interface Adapter

N2744A T2A Probe Interface Adapter

Easily connect Tek’s TekProbe-BNC level II probes to Keysight’s AutoProbe interface.

N2852A AutoProbe II to AutoProbe III Interface Adapter

N2852A AutoProbe II to AutoProbe III Interface Adapter

N2852A AutoProbe II to AutoProbe III interface adapter adapts your UXR-Series oscilloscope to enable seamless use of InfiniiMax III and InfiniiMax III+ probes.

N4827A PCB Socket Adapters

N4827A PCB Socket Adapters

Minimize ground inductance and maximize signal fidelity by soldering these adapters into a PCB as test points.

N4831A Sprung Hook Tip Adapters

N4831A Sprung Hook Tip Adapters

Use these sprung hook tip adapters with N2870A series 2.5-mm passive probes

N4847A Retractable Hook Tip Adapters

N4847A Retractable Hook Tip Adapters

The N4847A is a retractable hook tip adaptor for use with 10070D/73D/74D Series passive probes.

N4848A BNC Adapters

N4848A BNC Adapters

The N4848A is a probe tip-to-BNC adaptor for use with 10070D/73D/74D passive probes.

N4863A Horizontal Probe Tip to PCB Adapters

N4863A Horizontal Probe Tip to PCB Adapters

Minimize ground inductance and maximize signal fidelity by soldering these 2.5-mm adapters into a PCB as test points.

N4864A Vertical Probe Tip to PCB Adapters

N4864A Vertical Probe Tip to PCB Adapters

Minimize ground inductance and maximize signal fidelity by soldering these 2.5-mm adapters into a PCB as test points

N5442A Precision BNC 50 Ω Adapter

N5442A Precision BNC 50 Ω Adapter

Use your active probe (InfiniiMax I, II, or 1156A-58A) or 50 Ω BNC cables with the Infiniium 90000 X-series oscilloscope.

N5449A High-Impedance Adapter

N5449A High-Impedance Adapter

Connect probes that require a high-impedance input to the Infiniium V or 90000 X/Q-series oscilloscopes.

N5477A Sampling Scope Adapter

N5477A Sampling Scope Adapter

Probe up to 30 GHz with the Infiniium 86100 DCA modules by connecting them to the InfiniiMax III probing system

N7014A Banana-to-Socketed Tip Adapters

N7014A Banana-to-Socketed Tip Adapters

Easily connect to 0.025-in (0.64 mm) square pins (headers) as opposed to using the standard hook tip grabbers.

W2635A DDR3 BGA Probe Adapter

W2635A DDR3 BGA Probe Adapter

Test, debug, and characterize your DDR3 designs with direct signal access to the BGA package.

Differential Probes

DP0001A 400 MHz High Voltage Differential Probe

DP0001A 400 MHz High Voltage Differential Probe

DP0001A probe is a 400 MHz, 2kV (Mains Isolated) / 1 kV CAT III differential high voltage probe that you can use with a Keysight oscilloscope.

DP0010A Differential Active Probe, 250 MHz

DP0010A Differential Active Probe, 250 MHz

Minimize circuit loading with a differential input resistance of 1.7 MΩ and a low input capacitance of 1.5 pF.

DP0011A Differential Active Probe, 500 MHz

DP0011A Differential Active Probe, 500 MHz

Minimize circuit loading with a differential input resistance of 1.7 MΩ and a low input capacitance of 1.5 pF

DP0012A Differential Active Probe, 1 GHz

DP0012A Differential Active Probe, 1 GHz

Minimize circuit loading with a differential input resistance of 1.7 MΩ and a low input capacitance of 1.5 pF

DP0013A Differential Active Probe, 1.7 GHz

DP0013A Differential Active Probe, 1.7 GHz

Minimize circuit loading with a differential input resistance of 1.7 MΩ and a low input capacitance of 1.5 pF

E5381B Differential Flying Leads with 90-Pin Cable Connector

E5381B Differential Flying Leads with 90-Pin Cable Connector

E5381B flying lead set acquire signals from randomly located points in your target, and measure signals with ≥ 200 mV Vmax-Vmin signal amplitude.

N1021B 18 GHz Differential TDR/TDT Probe Kit

N1021B 18 GHz Differential TDR/TDT Probe Kit

Connect PCBs and other devices without connectors to TDR/TDT modules in the oscilloscope mainframe

N2750A InfiniiMode Active Differential Probe, 1.5 GHz

N2750A InfiniiMode Active Differential Probe, 1.5 GHz

Easily measure differential, single-ended, and common mode signals with a single probe tip.

N2751A InfiniiMode Active Differential Probe, 3.5 GHz

N2751A InfiniiMode Active Differential Probe, 3.5 GHz

Easily measure differential, single-ended, and common mode signals with a single probe tip.

N2752A InfiniiMode Active Differential Probe, 6 GHz

N2752A InfiniiMode Active Differential Probe, 6 GHz

Easily measure differential, single-ended, and common mode signals with a single probe tip.

N2776A InfiniiMode Differential Browser Tips

N2776A InfiniiMode Differential Browser Tips

Quickly probe the different points in your device and achieve flat response across the rated bandwidth

N2790A High-Voltage Differential Probe, 100 MHz

N2790A High-Voltage Differential Probe, 100 MHz

Obtain floating signal measurements of up to 1,400 V of differential voltage and up to 1,000 V of common mode voltage.

N2891A High-Voltage Differential Probe, 70 MHz

N2891A High-Voltage Differential Probe, 70 MHz

Obtain floating signal measurements of up to ±7000 V of differential and common mode voltage.

N7013A Extreme Temperature Probing Kit for Differential Active Probes

N7013A Extreme Temperature Probing Kit for Differential Active Probes

Operate your probe in extreme temperatures with these cables, hook tip adapters, and banana-to-socketed tip adapters

U1818A Active Differential Probe, 100 kHz To 7 GHz

U1818A Active Differential Probe, 100 kHz To 7 GHz

Perform high-frequency in-circuit measurements using network, spectrum, and signal source analyzers.

U1818B Active Differential Probe, 100 kHz To 12 GHz

U1818B Active Differential Probe, 100 kHz To 12 GHz

Perform high-frequency in-circuit measurements using network, spectrum, and signal source analyzers.

Dual Lead Probes

N4826A Dual-Lead Adapters, 9 cm

N4826A Dual-Lead Adapters, 9 cm

Connect to a 25-mil square pin or fine pitch accessories with these 9-cm adapters

N4836A Dual-Lead Adapters, 6.5 cm

N4836A Dual-Lead Adapters, 6.5 cm

Connect to a 25-mil square pin or fine pitch accessories with these 6.5-cm adapters

N4839A Dual-Lead Socketed Adapters, 6 cm

N4839A Dual-Lead Socketed Adapters, 6 cm

Connect to a 25-mil square pin or fine pitch accessories with these 6-cm adapters with integrated damping resistor.

N4840A Dual-Lead Solder-In Adapters, 5 cm

N4840A Dual-Lead Solder-In Adapters, 5 cm

Establish a secure solder connection to the DUT with these 5-cm adapters with integrated damping resistor

N4841A Dual-Lead Socketed Adapters, 9 cm

N4841A Dual-Lead Socketed Adapters, 9 cm

Connect to a 25-mil square pin or fine pitch accessories with these 9-cm adapters with integrated damping resistor

N4842A Dual-Pin PCB Header

N4842A Dual-Pin PCB Header

Connect your N2795A/2796A/2797A probe to 100-mil spacing thru-holes on PCB at full bandwidth

N4849A Dual-Lead Adapters, 12 cm

N4849A Dual-Lead Adapters, 12 cm

The N4849A is a dual lead adaptor for use with 10070D/73D/74D passive probes.

Hi-Z+ Probes

PP0001A Hi-Z+ Probe

PP0001A Hi-Z+ Probe

PP0001A Hi-Z+ Probe (1.3m) allows you to probe signals up to 1 GHz of bandwidth (<4 pF input capacitance) and 300 Vrms, 10 MΩ input impedance at low frequencies.

PP0002A Hi-Z+ Probe

PP0002A Hi-Z+ Probe

The PP0002A is a high-voltage passive probe that provides all the ease of use benefits of a passive probe, with the performance generally seen from an active probe.

PP0003A Hi-Z+ Probe

PP0003A Hi-Z+ Probe

PP0003A is a Hi-Z+ probe with an MMCX probe tip, allowing for easy connection to MMCX interfaces to probe signals up to 1 GHz of bandwidth and 30 Vrms.

InfiniiMax

MX0025A InfiniiMax Ultra Probe Amplifier, 25 GHz

MX0025A InfiniiMax Ultra Probe Amplifier, 25 GHz

Best probes for measuring signals found in the latest DDR5 and MIPI standards.

MX0032A InfiniiMax 4 RCRC Probe Amp, 52 GHz with 40 GHz Bessel-Thomson

MX0032A InfiniiMax 4 RCRC Probe Amp, 52 GHz with 40 GHz Bessel-Thomson

The InfiniiMax 4 series probes, a recent innovation from Keysight, stand out as the market’s premier high-bandwidth probing solution. This probe incorporates Keysight's cutting-edge designs and leverages Keysight-proprietary InP IC process technology. It is meticulously engineered to tackle the complexities of assessing next-generation high-speed signals, delivering unparalleled performance and precision.

1169B InfiniiMax II Series Probe Amplifier, 12 GHz

1169B InfiniiMax II Series Probe Amplifier, 12 GHz

Keysight 1169B probe is a 12 GHz real-time bandwidth probe that provides a large common-mode range and a large offset range for measuring differential and single-ended signals.

MX0031A InfiniiMax 4 RCRC Probe Amp, 52 GHz

MX0031A InfiniiMax 4 RCRC Probe Amp, 52 GHz

The InfiniiMax 4 series probes, a recent innovation from Keysight, stand out as the market’s premier high-bandwidth probing solution. This probe incorporates Keysight's cutting-edge designs and leverages Keysight-proprietary InP IC process technology. It is meticulously engineered to tackle the complexities of assessing next-generation high-speed signals, delivering unparalleled performance and precision.

MX0030A InfiniiMax 4 RCRC Probe Amp, 42 GHz

MX0030A InfiniiMax 4 RCRC Probe Amp, 42 GHz

The InfiniiMax 4 series probes, a recent innovation from Keysight, stand out as the market’s premier high-bandwidth probing solution. This probe incorporates Keysight's cutting-edge designs and leverages Keysight-proprietary InP IC process technology. It is meticulously engineered to tackle the complexities of assessing next-generation high-speed signals, delivering unparalleled performance and precision.

1130B InfiniiMax Probe, 1.5 GHz

1130B InfiniiMax Probe, 1.5 GHz

Provides extremely low input capacitance, flat frequency response, and resistor probe tip technology.

1131B InfiniiMax Probe, 3.5 GHz

1131B InfiniiMax Probe, 3.5 GHz

Provides extremely low input capacitance, flat frequency response, and resistor probe tip technology

1132B InfiniiMax Probe, 5 GHz

1132B InfiniiMax Probe, 5 GHz

Provides extremely low input capacitance, flat frequency response, and resistor probe tip technology.

1134B InfiniiMax Probe, 7 GHz

1134B InfiniiMax Probe, 7 GHz

Use for high-speed differential or single-ended probing in embedded designs

1168B InfiniiMax II Series Probe Amplifier, 10 GHz

1168B InfiniiMax II Series Probe Amplifier, 10 GHz

Provides a large common mode range and a large offset range for measuring differential and single-ended signals.

E2668B InfiniiMax Single-ended Connectivity Kit

E2668B InfiniiMax Single-ended Connectivity Kit

Use for single-ended measurements; includes one single-ended browser, one solder-in probe head, and one socketed probe head

E2669B InfiniiMax Differential/Single-ended Connectivity Kit

E2669B InfiniiMax Differential/Single-ended Connectivity Kit

Includes a differential browser, four solder-in differential probe heads, and two socketed differential probe heads

E2675B InfiniiMax Differential Browser, 6GHz

E2675B InfiniiMax Differential Browser, 6GHz

Use for general purpose hand-browsing and troubleshooting signals; includes 20 replaceable probe tips

E2676B InfiniiMax Single-ended Browser Probe Head

E2676B InfiniiMax Single-ended Browser Probe Head

Troubleshoot single-ended signals with Z-axis compliance where the small size of the probe head is the primary concern

E2677B InfiniiMax Differential Solder-In Probe Head, 12 GHz

E2677B InfiniiMax Differential Solder-In Probe Head, 12 GHz

Reach into tight spaces with 4-in lead length; includes 20 full bandwidth and 10 medium bandwidth damping resistors.

E2678B InfiniiMax Single-ended/Differential Probe Head

E2678B InfiniiMax Single-ended/Differential Probe Head

Measure either differential or single-ended signals via a plug-on socket connection

E2679B InfiniiMax Single-ended Solder-in Probe Head

E2679B InfiniiMax Single-ended Solder-in Probe Head

Reach into tight spaces with 4-in lead length; includes damping and 0 Ω ground resistors.

MX0020A InfiniiMax Ultra Probe Amplifier, 10 GHz

MX0020A InfiniiMax Ultra Probe Amplifier, 10 GHz

The best solution to easily and accurately probe small devices using the fully-integrated flexible micro probe head.

MX0021A InfiniiMax Ultra Probe Amplifier, 13 GHz

MX0021A InfiniiMax Ultra Probe Amplifier, 13 GHz

The best solution to easily and accurately probe small devices using the fully-integrated flexible micro probe head.

MX0022A InfiniiMax Ultra Probe Amplifier, 16 GHz

MX0022A InfiniiMax Ultra Probe Amplifier, 16 GHz

The best solution to easily and accurately probe small devices using the fully-integrated flexible micro probe head.

MX0024A InfiniiMax Ultra Probe Amplifier, 20 GHz

MX0024A InfiniiMax Ultra Probe Amplifier, 20 GHz

The best solution to easily and accurately probe small devices using the fully-integrated flexible micro probe head.

MX0100A InfiniiMax II Micro Probe Head Kit

MX0100A InfiniiMax II Micro Probe Head Kit

Perform probing on high-speed devices with this small, high-performance, reusable probe head.

MX0104A Performance Verification and Deskew Fixture for InfiniiMax Probes

MX0104A Performance Verification and Deskew Fixture for InfiniiMax Probes

Calibrate and deskew probe amplifiers and verify the performance of the probe using a VNA

MX0106A InfiniiMax Differential Solder-in Head, 23 GHz

MX0106A InfiniiMax Differential Solder-in Head, 23 GHz

The MX0106A is a solder-in head allowing a soldered connection into the target for reliable hands-free connection. This probe head provides 23 GHz bandwidth and low capacitive loading.

MX0109A InfiniiMax III GHz Extreme Temperature Solder-in Head, 26 GHz

MX0109A InfiniiMax III GHz Extreme Temperature Solder-in Head, 26 GHz

Supports extreme temperature testing of circuits and devices in temperatures ranging from -55 to +150°C.

N2801A InfiniiMax III Series Probe Amplifier, 20 GHz

N2801A InfiniiMax III Series Probe Amplifier, 20 GHz

The InfiniiMax III probing system provides the highest bandwidth and incredibly low loading to allow for a completely new level of signal fidelity and accuracy.

N2802A InfiniiMax III Series Probe Amplifier, 25 GHz

N2802A InfiniiMax III Series Probe Amplifier, 25 GHz

The InfiniiMax III probing system provides the highest bandwidth and incredibly low loading to allow for a completely new level of signal fidelity and accuracy

N2803A InfiniiMax III Series Probe Amplifier, 30 GHz

N2803A InfiniiMax III Series Probe Amplifier, 30 GHz

The InfiniiMax III probing system provides the highest bandwidth and incredibly low loading to allow for a completely new level of signal fidelity and accuracy.

N2812B InfiniiMax III Cable, 35 GHz

N2812B InfiniiMax III Cable, 35 GHz

Provides excellent flexibility with high quality measurements to match the performance of 90000 X-Series oscilloscope.

N2830A InfiniiMax III+ Series Probe Amplifier, 4 GHz

N2830A InfiniiMax III+ Series Probe Amplifier, 4 GHz

Easily switch between differential, single-ended, and common mode without adjusting probe tip connections

N2831A InfiniiMax III+ Series Probe Amplifier, 8 GHz

N2831A InfiniiMax III+ Series Probe Amplifier, 8 GHz

Easily switch between differential, single-ended, and common mode without adjusting probe tip connections

N2832A InfiniiMax III+ Series Probe Amplifier, 13 GHz

N2832A InfiniiMax III+ Series Probe Amplifier, 13 GHz

Easily switch between differential, single-ended, and common mode without adjusting probe tip connections

N2833A InfiniiMax II Differential Connectivity Kit

N2833A InfiniiMax II Differential Connectivity Kit

Use with InfiniiMax II probe amps; includes probe heads and tips to get up to speed on evaluation and development

InfiniiMax III Differential Connectivity Kit

InfiniiMax III Differential Connectivity Kit

Use with InfiniiMax III/III+ probe amps; includes probe heads and tips to get up to speed on evaluation and development

N2837A InfiniiMax II Browser Tip Kit

N2837A InfiniiMax II Browser Tip Kit

Includes 20 spring-loaded replacement tips and 20 solid replacement tips for secure probing contact with the N2839A.

N2838A InfiniiMax III PC Board ZIF Tips, 25 GHz

N2838A InfiniiMax III PC Board ZIF Tips, 25 GHz

Offers a 6:1 attenuation ratio and plastic forks to aid in soldering the tips to the DUT; includes five tips.

N2839A InfiniiMax II Differential Browser, 12 GHz

N2839A InfiniiMax II Differential Browser, 12 GHz

Achieve the measurement fidelity of a solder-in probe head with handheld browsing and extremely low loading.

N2848A InfiniiMax III QuickTip Probe Head

N2848A InfiniiMax III QuickTip Probe Head

Uses magnets to provide quick connect/disconnect when probing multiple high-speed test points.

N2849A InfiniiMax III QuickTip Tips

N2849A InfiniiMax III QuickTip Tips

Connects magnetically to the matching probe head for a quick and secure connection; includes four tips.

N2851A InfiniiMax I/II QuickTip Probe Head

N2851A InfiniiMax I/II QuickTip Probe Head

Uses magnets to provide quick connect/disconnect when probing multiple high-speed test points.

N2880A InfiniiMax In-line Attenuator Kit

N2880A InfiniiMax In-line Attenuator Kit

Measure larger signals with faster edges by increasing the dynamic range and offset range of the probe system.

N2884A InfiniiMax Differential Fine-Wire Probing Tips

N2884A InfiniiMax Differential Fine-Wire Probing Tips

Debug and test ICs with this high-fidelity, high-bandwidth 12-GHz solution for R&D and test engineers

N2887A InfiniiMax Soft Touch Pro Probe Adapter

N2887A InfiniiMax Soft Touch Pro Probe Adapter

Adapt the Pro Series soft touch logic analyzer to the InfiniiMax I and II Series input connectors.

N2888A InfiniiMax Soft Touch Pro Half-Channel Probe Adapter

N2888A InfiniiMax Soft Touch Pro Half-Channel Probe Adapter

Adapt the Pro series half-channel soft touch logic analyzer footprint to the InfiniiMax I and II series input connectors.

N5381B InfiniiMax II Differential Solder-In Probe Head, 12 GHz

N5381B InfiniiMax II Differential Solder-In Probe Head, 12 GHz

Reach into tight spaces with 4-in lead length; offers a reliable semi-permanent connection and very low loading

N5425B InfiniiMax Differential ZIF Probe Head, 18 GHz

N5425B InfiniiMax Differential ZIF Probe Head, 18 GHz

Probe signals with a considerable amount of test points in tight spaces, such as a DDR memory system.

N5426A InfiniiMax ZIF Tips, 20 GHz

N5426A InfiniiMax ZIF Tips, 20 GHz

Use this economical RoHS compliance solder-in probing solution for maximum bandwidth in a replaceable tip form factor.

N5439A InfiniiMax III ZIF Probe Head

N5439A InfiniiMax III ZIF Probe Head

Provides 28 GHz bandwidth in a replaceable tip form factor; ZIF tips can be left on the DUT as the probe head is moved.

N5444A InfiniiMax III Probe Head

N5444A InfiniiMax III Probe Head

Connect two 2.92-mm, 3.5-mm, or SMA cables to make a differential measurement on a single oscilloscope channel.

N5445A InfiniiMax III Browser Head

N5445A InfiniiMax III Browser Head

Troubleshoot differential signals with Z-axis compliance and variable spacing from 20 to 125 mil.

N5450B InfiniiMax Extreme Temperature Extension Cable

N5450B InfiniiMax Extreme Temperature Extension Cable

Probe your device’s signals in extreme testing conditions with this 92-cm pair of matched cables.

N5451A InfiniiMax Differential Long Wire ZIF Tips

N5451A InfiniiMax Differential Long Wire ZIF Tips

Extend your ZIF tip connection up to 11 mm with this economical, solder-in probe solution; set includes 10 ZIF tips.

N7000A InfiniiMax III+ Series Probe Amplifier, 8 GHz

N7000A InfiniiMax III+ Series Probe Amplifier, 8 GHz

Use for general-purpose, high-speed differential bus probing or to measure all the components of a differential signal.

N7001A InfiniiMax III+ Series Probe Amplifier, 13 GHz

N7001A InfiniiMax III+ Series Probe Amplifier, 13 GHz

Use for general-purpose, high-speed differential bus probing or to measure all the components of a differential signal

N7002A InfiniiMax III+ Series Probe Amplifier, 16 GHz

N7002A InfiniiMax III+ Series Probe Amplifier, 16 GHz

Use for general-purpose, high-speed differential bus probing or to measure all the components of a differential signal.

N7003A InfiniiMax III+ Series Probe Amplifier, 20 GHz

N7003A InfiniiMax III+ Series Probe Amplifier, 20 GHz

Use for general-purpose, high-speed differential bus probing or to measure all the components of a differential signal.

Kits

10072A Surface Mount Clip Kit

10072A Surface Mount Clip Kit

Probe fine-pitch ICs with the ten included IC clips and two dual-lead adapters that connect to 10080 family probes.

10075A IC Clip Kit, 0.5 mm

10075A IC Clip Kit, 0.5 mm

Probe fine-pitch ICs with two dual-lead adapters and four 0.5 mm clips that can be mounted side by side.

10077A Accessory Kit for 10076A High Voltage Probe

10077A Accessory Kit for 10076A High Voltage Probe

Includes retractable tip, ground lead, insulation cap, measuring pins, and tags for the 10076A probe

42941A Impedance Probe Kit for Impedance Analyzer

42941A Impedance Probe Kit for Impedance Analyzer

Perform in-circuit measurements on the E4990A-120 with better accuracy and wider impedance from 20 Hz to 120 MHz.

DP0002A Accessory Kit for DP0001A

DP0002A Accessory Kit for DP0001A

The DP0002A is an accessory kit for DP0001A high voltage differential probe.

E2655C Probe deskew and Performance Verification Kit

E2655C Probe deskew and Performance Verification Kit

Includes adapters SMA (m) to SMA (m), SMA (m) to BNC (f), and BNC (m) to SMA (m); 50 Ω SMA terminator; and deskew fixture

MX0102A Soldering Toolkit

MX0102A Soldering Toolkit

MX0102A Soldering Toolkit performs soldering tasks easily with this toolkit used to solder the lead wires of the probe head to a Device Under Test (DUT).

N1501A Dielectric Probe Kit

N1501A Dielectric Probe Kit

Determine the intrinsic electromagnetic properties of a variety of dielectric materials.

N2798A Accessory Kit for N2797A

N2798A Accessory Kit for N2797A

Includes solderable tips, rigid probe tips, and other accessories designed for extreme temperature chamber testing

N2817A Probe Tip Accessory Kit for N2805A

N2817A Probe Tip Accessory Kit for N2805A

Includes two alligator clips, two hook clips, two pincer clips, and two browser tips.

N2877A Deluxe Probe Accessory Kit

N2877A Deluxe Probe Accessory Kit

Includes the accessories you need for every application of the N2870A series passive probes

N4829A Probe Tip Kit

N4829A Probe Tip Kit

Includes 10 each of rigid and spring-loaded probe tips for use with N2870A series 2.5-mm passive probes.

N9311X RF and Microwave Accessory Kit

N9311X RF and Microwave Accessory Kit

N9311X RF and Microwave Accessory Kit complements Keysight's low-cost handheld and benchtop solutions. Select the accessories for your measurement needs.

U1168A Standard Test Lead Kit

U1168A Standard Test Lead Kit

Compatible with the U1230/40/50/70 handheld DMMs; includes test leads, test probes, alligator clips, and SMT and mini grabbers.

U1168B Standard Test Lead Kit

U1168B Standard Test Lead Kit

Get started on all your troubleshooting tasks with this complete set of DMM probes with leads, clips, and grabbers

Passive Probes

10070D Passive Probe, 1:1, 20 MHz, 1.5 m

10070D Passive Probe, 1:1, 20 MHz, 1.5 m

Features a durable cable and a solid stainless-steel probe body encased with a hard, fracture-resistant plastic

10073D Passive Probe, 10:1, 500 MHz, 1.5 m

10073D Passive Probe, 10:1, 500 MHz, 1.5 m

Use the probe identification feature to automatically configure the oscilloscope for probe attenuation.

N2140A Passive Probe, 10:1, 200 MHz, 2-Pack

N2140A Passive Probe, 10:1, 200 MHz, 2-Pack

Features a high input resistance of 10 MΩ to address a wide range of measurement needs with low probe loading.

N2141A Passive Probe Accessory Kit for N2140A

N2141A Passive Probe Accessory Kit for N2140A

Includes all the standard accessories for N2140A passive probes, including retractable hook, adjustment tool, and more.

N2142A Passive Probe, 10:1, 75 MHz, 2-Pack

N2142A Passive Probe, 10:1, 75 MHz, 2-Pack

Features a high input resistance of 10 MΩ to address a wide range of measurement needs with low probe loading.

N2143A Passive Probe Accessory Kit for N2142A

N2143A Passive Probe Accessory Kit for N2142A

Includes all the standard accessories for N2142A passive probes, including retractable hook, adjustment tool, and more.

N2827A Passive Probe Cable

N2827A Passive Probe Cable

Use as a replacement for the secondary cable in the N2820A current probe.

N2840A Passive Probe, 10:1, 50 MHz, 1.2 m

N2840A Passive Probe, 10:1, 50 MHz, 1.2 m

Features a high input resistance of 10 MΩ; can be adjusted for low-frequency and high-frequency compensation

N2841A Passive Probe, 10:1, 150 MHz, 1.2 m

N2841A Passive Probe, 10:1, 150 MHz, 1.2 m

Features a high input resistance of 10 MΩ; can be adjusted for low-frequency and high-frequency compensation.

N2842A Passive Probe, 10:1, 300 MHz, 1.2 m

N2842A Passive Probe, 10:1, 300 MHz, 1.2 m

Features a high input resistance of 10 MΩ; can be adjusted for low-frequency and high-frequency compensation.

N2843A Passive Probe, 10:1, 500 MHz, 1.2 m

N2843A Passive Probe, 10:1, 500 MHz, 1.2 m

Features a high input resistance of 10 MΩ; can be adjusted for low-frequency and high-frequency compensation.

N2853A Passive Probe, 10:1, 350 MHz, 2 m

N2853A Passive Probe, 10:1, 350 MHz, 2 m

Features a high input resistance of 10 MΩ; can be adjusted for low-frequency and high-frequency compensation

N2856A Passive Probe Accessory Kit

N2856A Passive Probe Accessory Kit

Includes standard accessories for the N2840A, N2841A, N2842A, N2843A, and N2853A passive probes

N2857A Passive Probe Alligator Ground

N2857A Passive Probe Alligator Ground

Replacement for the ground lead included with the N2840A, N2841A, N2842A, N2843A, and N2853A passive probes

N2858A Passive Probe Retractable Hook Tip

N2858A Passive Probe Retractable Hook Tip

Replacement for the hook tip included with N2840A, N2841A, N2842A, N2843A, and N2853A passive probes

N2859A Passive Probe Replaceable Probe Tip

N2859A Passive Probe Replaceable Probe Tip

Replacement for the probe tip included with N2840A, N2841A, N2842A, N2843A, and N2853A passive probes

N2870A Passive Probe, 1:1, 35 MHz, 1.3 m

N2870A Passive Probe, 1:1, 35 MHz, 1.3 m

Easily probe densely populated IC components with this probe's compact 2.5-mm tip diameter and low input capacitance.

N2871A Passive Probe, 10:1, 200 MHz, 1.3 m

N2871A Passive Probe, 10:1, 200 MHz, 1.3 m

Easily probe densely populated IC components with this probe's compact 2.5-mm tip diameter and low input capacitance.

N2872A Passive Probe, 10:1, 350 MHz, 1.3 m

N2872A Passive Probe, 10:1, 350 MHz, 1.3 m

Easily probe densely populated IC components with this probe's compact 2.5-mm tip diameter and low input capacitance

N2873A Passive Probe, 10:1, 500 MHz, 1.3 m

N2873A Passive Probe, 10:1, 500 MHz, 1.3 m

The N2873A passive probe offers DC to 500 MHz and 10:1 attenuation factor to address a wide range of measurement needs. Use this probe's compact 2.5-mm tip diameter and low input capacitance for general-purpose probing.

N2874A Passive Probe, 10:1, 1.5 GHz, 1.3 m

N2874A Passive Probe, 10:1, 1.5 GHz, 1.3 m

Easily probe densely populated IC components

N2875A Passive Probe, 20:1, 500 MHz, 1.3 m

N2875A Passive Probe, 20:1, 500 MHz, 1.3 m

Easily probe densely populated IC components

N2876A Passive Probe, 100:1, 1.5 GHz, 1.3 m

N2876A Passive Probe, 100:1, 1.5 GHz, 1.3 m

Easily probe densely populated IC components and measure fast edges in high speed applications more accurately.

N2878A General Purpose Passive Probe Accessory Kit

N2878A General Purpose Passive Probe Accessory Kit

N2878A General Purpose Passive Probe Accessory Kit includes the most commonly used accessories for N2870A Series passive probes.

N2879A Fine Pitch Passive Probe Accessory Kit

N2879A Fine Pitch Passive Probe Accessory Kit

N2879A Fine Pitch Passive Probe Accessory Kit includes the accessories needed for probing fine pitch ICs and components with N2870A series passive probes.

N2885A PCB Adapter Kit for N287xA Series Passive Probes

N2885A PCB Adapter Kit for N287xA Series Passive Probes

Minimize ground inductance and maximize signal fidelity by soldering the 25 included sockets into a PCB as test points

N2889A Passive Probe, 10:1/1:1, 350 MHz, 1.3m

N2889A Passive Probe, 10:1/1:1, 350 MHz, 1.3m

Provides a switch in the probe handle for switching the attenuation ratio between 1:1 and 10:1

N2894A Passive Probe, 10:1, 700 MHz, 1.3 m

N2894A Passive Probe, 10:1, 700 MHz, 1.3 m

Easily probe densely populated IC components with this probe's compact 2.5-mm tip diameter and low input capacitance.

N7007A Extreme Temperature Passive Probe

N7007A Extreme Temperature Passive Probe

Use for extreme temperatures ranging from -40 to +85°C without compromising measurement performance

U1560B Passive Probe, 1:1, 50 MHz, 1.2 m

U1560B Passive Probe, 1:1, 50 MHz, 1.2 m

Compatible with the U1600A series handheld digital oscilloscope; safety rated for Cat III 600 V

U1561B Passive Probe, 10:1, 500 MHz, 1.2 meter

U1561B Passive Probe, 10:1, 500 MHz, 1.2 meter

Compatible with the U1600A series handheld digital oscilloscope; safety rated for Cat III 100 V

U1562B Passive Probe, 100:1, 500 MHz, 1.2 m

U1562B Passive Probe, 100:1, 500 MHz, 1.2 m

Compatible with the U1600A series handheld digital oscilloscope; safety rated for Cat III 1000 V

Power Rail Probes

N7020A Power Rail Probe, 2 GHz

N7020A Power Rail Probe, 2 GHz

The N7020A power rail probe is used for making power integrity measurements that need mV sensitivity when measuring noise, ripple, and transients on DC supplies.

N7023A Power Rail Probe Browser, 350 MHz

N7023A Power Rail Probe Browser, 350 MHz

Access tight spaces with the compact 2.5 mm diameter head or enable hands-free capacitor probing with SMT clip.

N7024A Power Rail Probe, 6 GHz

N7024A Power Rail Probe, 6 GHz

Make power integrity measurements that need mV sensitivity when measuring noise, ripple, and transients on DC supplies.

N7032A Power Rail Probe Browser, 4 GHz

N7032A Power Rail Probe Browser, 4 GHz

Achieve a variety of probing angles while ensuring a reliable connection with spring pin ground connection

N7033A Power Rail Probe Browser, 5 GHz

N7033A Power Rail Probe Browser, 5 GHz

Achieve a variety of probing angles while ensuring a reliable connection with spring pin ground connection

Probe Cables

N2755A MSO Cable Kit, 8-Channel

N2755A MSO Cable Kit, 8-Channel

N2755A is a low-cost 8-channel MSO cable kit allows you to easily probe far-apart pins. It includes flying lead cable, 3 right-angle grounds, 3 ground extenders.

N2756A MSO Cable Kit, 16-Channel

N2756A MSO Cable Kit, 16-Channel

Easily probe far-apart pins; includes flying lead cable, 5 right-angle grounds, 5 ground extenders, and 18 grabbers

N2814A Ultra High Performance Cable, 65 GHz

N2814A Ultra High Performance Cable, 65 GHz

Provides excellent flexibility with high quality measurements to match the performance of 90000 Q-series oscilloscope.

N2823A Cable Assembly, Coaxial Phased-matched Pair, 1 m

N2823A Cable Assembly, Coaxial Phased-matched Pair, 1 m

Extend the cable length of your test fixtures using this 1-m, flexible coax cable assembly with 2.92-mm (m) connectors

N5448B Cable Assembly, Coaxial Phased-matched Pair, 25 cm

N5448B Cable Assembly, Coaxial Phased-matched Pair, 25 cm

Extend the cable length of your test fixtures using this 25-cm, flexible coax cable assembly with 2.92-mm (m) connectors.

N7021A Pigtail Cables

N7021A Pigtail Cables

Easily reuse these durable, small-diameter cables through multiple soldering and unsoldering cycles.

N7022A Main Cable

N7022A Main Cable

Ensure high signal fidelity with this flexible and durable 1.2-m replacement cable.

U4201A Logic Analyzer Cable

U4201A Logic Analyzer Cable

The U4201A logic analyzer cable connects to all logic analyzer probes designed for use with 90-pin cable connectors.

U4208A Probe/Cable, 61-Pin ZIF, Left Wing

U4208A Probe/Cable, 61-Pin ZIF, Left Wing

The U4208A probe/cable has a 61-pin ZIF is used to connect from the left wing of a W4640A Series DDR4 BGA interposer directly into U4164A logic analyzer.

Probe Positioner

N2784A One-Arm Probe Positioner

N2784A One-Arm Probe Positioner

Provide stable X-Y positioning with only a “lift and drop” motion for hands-free probing.

N2785A Two-arm Probe Positioner

N2785A Two-arm Probe Positioner

Provide stable XY positioning with only a “lift and drop” motion for hands-free probing.

N2786A Two-leg Probe Positioner

N2786A Two-leg Probe Positioner

Choose from three different apertures to fit passive probes of various sizes for XY positioning.

N2787A 3D Probe Positioner

N2787A 3D Probe Positioner

Achieve stable 3D probe positioning for hard-to-reach XYZ access with this flexible articulating arm.

Single Ended Probes

E5380B Mictor Probe-Single-ended, with 90-pin Cable Connectors

E5380B Mictor Probe-Single-ended, with 90-pin Cable Connectors

Provides a reliable connection to your target through a Mictor connector designed into your target

E5382B Single-Ended Flying Leads with 90-Pin Cable Connector

E5382B Single-Ended Flying Leads with 90-Pin Cable Connector

E5382B Single-Ended Flying Leads acquire signals from randomly located points in your target, and measure signals with ≥ 250 mV p-p signal amplitude.

E5383B Single-Ended Flying Leads With 40-Pin Cable Connector

E5383B Single-Ended Flying Leads With 40-Pin Cable Connector

E5383B Single-Ended Flying Leads acquire signals from randomly located points in your target, and measure signals with ≥ 600 mV p-p signal amplitude.

E5384A Single-ended ZIF Probe, for DDR2 DRAM BGA Probe Connection

E5384A Single-ended ZIF Probe, for DDR2 DRAM BGA Probe Connection

Connects to the DDR2 DRAM BGA probe to enable viewing of data traffic on industry standard DDR2 DIMMs with the 16900 Series or U4154A logic analyzers.

E5406A Single-ended Connectorless Probe

E5406A Single-ended Connectorless Probe

Provides a convenient, reliable means of probing your target system without the need for a connector.

E5845A Single-ended ZIF Probe, for W3631A Probe Connection

E5845A Single-ended ZIF Probe, for W3631A Probe Connection

Connects to the W3631A DDR3 BGA probe to enable viewing of industry standard DDR3 DIMMs with a 16900 Series or U4154A logic analyzers.

E5847A Single-ended ZIF Probe, for W3633A Probe Connection

E5847A Single-ended ZIF Probe, for W3633A Probe Connection

E5847A Single-ended ZIF Probe connects to the W3633A DDR3 BGA probe to enable viewing of industry standard DDR3 DIMMs with a 16900 or U4154A logic analyzer.

U4203A Single-Ended 34-Channel Flying Lead

U4203A Single-Ended 34-Channel Flying Lead

Use this general purpose, flying lead probe with 16850A Series portable logic analyzers

U4204A Soft Touch Pro Series Single-Ended Connectorless Probe

U4204A Soft Touch Pro Series Single-Ended Connectorless Probe

Use this connectorless probe with the 16850A Series portable logic analyzers

U4205A Single-Ended Mictor Connector Probe, 34-Channel

U4205A Single-Ended Mictor Connector Probe, 34-Channel

Use this general purpose, flying lead probe with 16850A Series portable logic analyzers.

U4206A Single-ended, Direct Connect Probe, 34-Channel, 4 x 160-pin

U4206A Single-ended, Direct Connect Probe, 34-Channel, 4 x 160-pin

Routes to four 160-pin connectors that plug into the front panel connectors of a U4164A logic analyzer module.

U4207A Single-Ended, Direct Connect Probe, 34-Channel, 4 x 160-pin, Zero Ω

U4207A Single-Ended, Direct Connect Probe, 34-Channel, 4 x 160-pin, Zero Ω

Use only with Keysight BGA interposers that include RC tip network for U4164A logic analyzers.

Resistor Tips

N2822A 20 mΩ Resistor Tip

N2822A 20 mΩ Resistor Tip

Use with N2820A and N2821A high-sensitivity current probes for 250 μA to 5 A of measurable range.

N2824A 100 mΩ Resistor Tips

N2824A 100 mΩ Resistor Tips

Use with N2820A and N2821A high-sensitivity current probes for 50 μA to 2.2 A of measurable range.

N2825A User-defined Resistor Tip

N2825A User-defined Resistor Tip

Use with N2820A and N2821A high-sensitivity current probes and choose your resistor between 1 mΩ to 1 MΩ

Other Probes and Probe Accessories

10076C High Voltage Probe, 100:1, 3.7 kVpk, 500 MHz

10076C High Voltage Probe, 100:1, 3.7 kVpk, 500 MHz

Easily probe small power electronics components and get the voltage and bandwidth you need for high-voltage measurements

11059A Kelvin Probe Set

11059A Kelvin Probe Set

Reduce ground-related errors and contact resistance through gold-plated flat tweezers and special gripping surfaces

11060A Surface Mount Device Probe

11060A Surface Mount Device Probe

Access and accurately measure surface mount devices using this probe with a gold-plated beryllium-copper tweezer

85024A High-Frequency Probe, 300 kHz to 3 GHz

85024A High-Frequency Probe, 300 kHz to 3 GHz

Complete high-frequency probing without adversely loading the circuit under test

E5405B Differential Connectorless Probe

E5405B Differential Connectorless Probe

Provides a convenient, reliable means of probing your target system without the need for a connector.

M9240A PXIe AutoProbe Power Module for M924XA Modular Oscilloscopes

M9240A PXIe AutoProbe Power Module for M924XA Modular Oscilloscopes

The M9240A PXIe AutoProbe power module provides the connection interface for up to four Keysight AutoProbes and the associated power for use with M924XA PXIe modular oscilloscopes.

N1027A Accessories for DCA Oscilloscopes Family

N1027A Accessories for DCA Oscilloscopes Family

N1027A is a collection of accessories for mainframes and modules in the 86100 family of Digital Communication Analyzers (DCAs).

N2766A Horizontal Mini Probe Socket, Quantity 25

N2766A Horizontal Mini Probe Socket, Quantity 25

Minimize ground inductance and maximize signal fidelity by soldering the 25 included sockets into a PCB as test points

N2768A Vertical Mini-Probe Socket, Quantity 25

N2768A Vertical Mini-Probe Socket, Quantity 25

Minimize ground inductance and maximize signal fidelity by soldering the 25 included sockets into a PCB as test points

N2777A InfiniiMode Solder-in Tips

N2777A InfiniiMode Solder-in Tips

Solder these tips directly to your test device; supports up to 2.5 GHz with Keysight 2751A / 52A InfiniiMode differential active probes, and up to 1.5 GHz with Keysight's N2750A InfiniiMode differential active probe.

N2778A InfiniiMode Socketed Tips

N2778A InfiniiMode Socketed Tips

Directly connect to 0.1-in (2.54-mm) header pins; supports up to 3 GHz with Keysight's N2751A / 52A InfiniiMode differential active probes, and up to 1.5 GHz with the Keysight N2750A active differential probe.

N2789A Spring Ground Tip for 10076B/C

N2789A Spring Ground Tip for 10076B/C

Enables extremely low inductance, resulting in higher bandwidth measurement up to 500 MHz.

N2826A Replacement Wires, Quantity 5

N2826A Replacement Wires, Quantity 5

Replace probe sensor leads with these 16-cm twisted pair sensor wires without socket attachment

N2828A Replacement MBB (Make Before Break) Headers

N2828A Replacement MBB (Make Before Break) Headers

Fits into standard 0.1-in (2.54-mm) spacing for 0.025-in (0.65-mm) square pins.

N2829A Replacement MBB (Make Before Break) Receptacles

N2829A Replacement MBB (Make Before Break) Receptacles

Use on N2820A and N2821A high-sensitivity current probes; includes receptacles and 15.5 cm, AWG 22-socketed wires.

N2881A DC Blocking Capacitors

N2881A DC Blocking Capacitors

Block out unwanted DC components of the input signal up to 30 V with this pair of blocking caps

N4822A Socketed Tip for Application Fixtures

N4822A Socketed Tip for Application Fixtures

Connect the probe directly to 0.1-in (2.54-mm) header pins and achieve flat response with damping resistor

N4828A Ground Springs, 5 mm

N4828A Ground Springs, 5 mm

Minimize ground inductance and maximize signal fidelity with these standard 5-mm ground springs.

N4837A Ground Leads

N4837A Ground Leads

Use these standard 16-cm ground leads with N2870A series 2.5-mm passive probes

N4838A Ground Springs, 2.5 mm

N4838A Ground Springs, 2.5 mm

Minimize ground inductance and maximize signal fidelity with these standard 2.5-mm ground springs.

N4843A Solderable Tips

N4843A Solderable Tips

Solder these 25-mil square pins (10 count) into the target board for a temporary test point

N4844A Right-Angle Ground Leads, 5 cm

N4844A Right-Angle Ground Leads, 5 cm

Use these 5-cm right-angle ground leads for general, low-frequency probing with N2795A/2796A/2797A active probes

N4845A Ground Blades

N4845A Ground Blades

Reduce ground lead inductance with these ground blades for use with N2795A/2796A/2797A active probes

N4846A Offset Blades

N4846A Offset Blades

Reduce ground lead inductance with these offset ground blades for use with N2795A/2796A/2797A active probes

N7004A Optical-to-Electrical Converter, 33 GHz

N7004A Optical-to-Electrical Converter, 33 GHz

View and measure optical signals with Infiniium real-time oscilloscopes using this compact, fully integrated solution.

N7005A 60 GHz Optical-to-Electrical Converter

N7005A 60 GHz Optical-to-Electrical Converter

The N7005A Optical-to-Electrical Converter is a high-sensitivity photodetector module for optical-to-electrical conversion of optical signals into oscilloscopes.

N7006A Spring Ground Tip

N7006A Spring Ground Tip

Offers 400-MHz bandwidth when used in conjunction with the N7007A extreme temperature passive probe

N7008A Retractable Hook Tip

N7008A Retractable Hook Tip

Ideal for a broad range of general-purpose extreme temperature applications when used with the N7007A passive probe

N7009A Alligator Ground Lead

N7009A Alligator Ground Lead

Ideal for a broad range of general-purpose extreme temperature applications when used with the N7007A passive probe

U1164A Fine Tip Test Probes

U1164A Fine Tip Test Probes

Compatible with test leads shipped with U1210, U1240B, U1250, U1270 series of handheld clamp meter and multimeters.

U1169A Test Probe Leads, with 19-mm Tips and 4-mm Tips

U1169A Test Probe Leads, with 19-mm Tips and 4-mm Tips

Use with handheld DMMs; consists of insulated test leads, 19-mm-tips test probes, and 4-mm tips test probes

U1176A LED Probe Clip Light

U1176A LED Probe Clip Light

Clip this 3-in flashlight on your test probes for great visibility when using your handheld DMMs in dark places

U1554B Hook Clip for Probe Tip

U1554B Hook Clip for Probe Tip

Designed for use with U1560B, U1561B, and U1562B passive probes; safety rated for CAT III 1000 V, CAT IV 600 V

U4321A PCIe Interposer Probe

U4321A PCIe Interposer Probe

Capture 100% accurate data in all Gen3 platforms and all link widths x1 through x16, through unique ESP technology

U4324A PCIe 3.0 Flying Lead Solder Down Probe

U4324A PCIe 3.0 Flying Lead Solder Down Probe

Provides signal capture when no PCIe slot connector or PCIe standard mid bus footprint is available

U5404A Remote Switch Probe

U5404A Remote Switch Probe

This 18 mm test probe is highly recommended for CAT IV environment and is compatible with the U1281A/82A handheld DMMs.

W2631B DDR2 X16 BGA Command and Data Probe for Logic Analyzer and Scope, 4 Probe Set

W2631B DDR2 X16 BGA Command and Data Probe for Logic Analyzer and Scope, 4 Probe Set

Enables viewing of data traffic on industry standard DDR2 DIMMs with the 16900 Series logic analyzer and oscilloscope.

W2633B DDR2 X8 BGA Command and Data Probe for Logic Analyzer and Scope, 4 Probe Set

W2633B DDR2 X8 BGA Command and Data Probe for Logic Analyzer and Scope, 4 Probe Set

Enables viewing of data traffic on industry standard DDR2 DIMMs with the 16900 Series logic analyzer and oscilloscope.

W2637A LPDDR BGA Probes

W2637A LPDDR BGA Probes

Provides complete signal access for debug and validation efforts with logic analyzers and oscilloscopes.

W2638A LPDDR BGA Probes

W2638A LPDDR BGA Probes

LPDDR probes for oscilloscopes and logic analyzers.

W3633A DDR3 x4/x8 BGA Command and Data Probe for Logic Analyzer and Scope

W3633A DDR3 x4/x8 BGA Command and Data Probe for Logic Analyzer and Scope

Enables viewing of data traffic on industry standard DDR3 DRAMs with Keysight 16900 series logic analyzers and Infiniium oscilloscopes.
View All Probes and Probe Accessories

Want help or have questions?

Contact Us