Here's the page we think you wanted. See search results instead:

HIGHLIGHTS

Bandwidth (with 7 mm wire):

  • > 10 GHz (typical) at zero degree span
  • > 4.4 GHz (typical) at 60 degrees span

Bandwidth (with 11 mm wire):

  • > 5 GHz (typical) at zero degree span
  • > 3.3 GHz (typical) at 60 degrees span

Features

  • Extend your ZIF Tip connection up to 11 mm.
  • Most economical solder-in probe solution today.
  • N5451A ZIF Tip comes in a set of 10 long wire ZIF Tips (user solders wires at their desired length).
  • N5451A ZIF Tip requires at least one N5425A Infiniium ZIF probe head.
  • For up to 12 GHz of bandwidth ZIF probing, use the N5426A ZIF probe tips.
N5451A InfiniiMax Differential Long Wire ZIF Tips

Interested in a N5451A?

[an error occurred while processing this directive]

Featured Resources for N5451A InfiniiMax Differential Long Wire ZIF Tips

User Manuals 2023.10.15

1168/9B-Series Differential and Single-Ended Probes User’s Guide

1168/9B-Series Differential and Single-Ended Probes User’s Guide

This guide describes how to set up and use the 1168/9B-series probes with the recommended probe heads.

2023.10.15

Application Notes 2024.01.23

Oscilloscope Probing for High-speed Signals

Oscilloscope Probing for High-speed Signals

The probe is the dominant factor in determining the noise floor and response of your measurement system. Learn more about this and probe loading effects.

2024.01.23

Data Sheets 2024.06.25

Infiniium Oscilloscope Probes and Accessories

Infiniium Oscilloscope Probes and Accessories

To get the most out of your Keysight Infiniium oscilloscope, you need the right probes and accessories for your particular applications. Whether you need the high bandwidth and low loading of an active probe, an easy way to connect to surface mount ICs, or a passive probe to measure high voltages, there’s a wide selection of high-quality probes and accessories for your Infiniium oscilloscope. The Infiniium probes and accessories data sheet provides you the overview of all probes and accessories recommended for Infiniium oscilloscopes.

2024.06.25

Application Notes 2014.07.30

Using InfiniiMax Active Probes Offset

Using InfiniiMax Active Probes Offset

Learn how to properly use Infiniimax probe offset for various applications to get maximum performance and dynamic range from your InfiniiMax active probes.

2014.07.30

Application Notes 2023.03.12

Probe Soldering Guidelines for Keysight InfiniiMax Probes

Probe Soldering Guidelines for Keysight InfiniiMax Probes

There are various ways to connect test instrumentation probes to devices under test (DUTs). One such method is soldering, which provides a reliable connection and minimizes parasitic probing effects by keeping wire lengths and connections as short as possible. Many of Keysight’s high performance oscilloscope probes utilize soldered connections. As probes and devices continue to shrink, using the correct tools and soldering skills becomes even more critical in order to avoid damage and connectivity issues. This guide provides helpful tips, recommended tools, and techniques specific to Keysight probes to help test engineers make the most out of their soldered-in probes and connections.

2023.03.12

View All Resources

View All Resources

Want help or have questions?

Contact Us