How to Test USB4 Receiver Compliance

Get quote
High-Performance BERT
+ High-Performance BERT
High-Performance BERT
+ High-Performance BERT

Calibrate and test USB4 receiver performance to USB-IF standards

Testing physical-layer (PHY) USB4 receivers for conformance or compliance requires a USB4 testbed comprised of a BERT, high-bandwidth oscilloscope, receiver test application software, and a USB4 microcontroller test module. The application software automates measurement and test case execution as specified in the USB4 Electrical Compliance Test Specification, as defined by the Universal Serial Bus Implementers Forum (USB-IF).

Precision testbed calibration is required to ensure the device under test passes conformance specification. This requires optimizing the transmitter equalizer and then finely calibrating the bit error ratio tester's (BERT) stress signal using a high-performance oscilloscope. During the receiver test, the BERT injects the stress signals on the lane under test. The test automation software and a USB4 microcontroller test module are used to perform the BER test, which validates whether or not the device under test exceeds the allowance defined by the USB compliance test specification.

Automated USB4 receiver compliance test solution

Automated USB4 receiver compliance test solution

USB4 receiver testing requires precise stress signal calibration and consistently repeatable bit error ratio measurements. The Keysight USB4 receiver test solution comprises the N5991U40A USB4 receiver test software for receiver calibration and testing, running on an M8040A high-performance BERT, a UXR-Series high-performance oscilloscope for signal calibration, a USB4 microcontroller test module, and additional signal integrity software for the oscilloscope.
Get quote

See demo of USB4 receiver compliance testing

Explore products for our USB4 receiver compliance test solution

Related use cases

How to Test USB 2.0 Interface Compliance

How to Test USB 2.0 Interface Compliance

USB 2.0 compliance requires an oscilloscope with 2 GHz or higher bandwidth, a dedicated test fixture, and USB 2.0 compliance software. Learn how to test USB 2.0 compliance to ensure interoperability.

Learn more keysight-arrow

How to Test DDR5 Transmitter Compliance

How to Test DDR5 Transmitter Compliance

Ensuring interoperability of a DDR5 transmitter with other devices requires extensive testing to JEDEC conformance standards. Learn how to use a high-bandwidth oscilloscope and probes, along with interposer boards for probing as close to the silicon as possible, to test the exhaustive list of conformance measurements and test cases required for compliance.

Learn more keysight-arrow

How to Test PCIe® 6.0 Transmitter Compliance

How to Test PCIe® 6.0 Transmitter Compliance

Validating PCIe® 6.0 devices requires transmitter interoperability and compliance testing to meet PCI-SIG® specifications. Learn how to conduct physical layer testing using test tools including high-bandwidth oscilloscopes and automated software to efficiently prove conformance with compliance test specifications.

Learn more keysight-arrow

contact us logo

Get in touch with one of our experts

Need help finding the right solution for you?

Contact us