How to Simulate Interference for Automotive Radar Testing
Simulating a radar interference functional test in the lab
Assessing how interference sources negatively impact the functionality of an automotive radar sensor (the victim) requires a radar target simulator (RTS) to act as the main target vehicle. An arbitrary waveform generator acts as a versatile interference source and a signal analyzer monitors the interference signal’s characteristics. These characteristics include power level, bandwidth, and repetition rate. Simulated interference signals can vary from simple continuous wave (CW) and frequency modulated continuous wave (FMCW) chips to more complex ones such as phase-modulated continuous wave (PMCW), orthogonal frequency-division multiplexing (OFDM), or other custom modulations of choice.
During the test, engineers increase the power level of the interferer signals until the victim radar starts to operate abnormally. A trigger function synchronizes the signals between the victim and the interferers. To save time and labor, use automation software to run the tests repeatedly using multiple preprogrammed interferer signals and power levels. This test procedure complies with ETSI TS 103 567 on signal interferer handling.
Automotive radar interference test solution
See demo of automotive radar test
Explore products in our automotive radar interference testing solution
-
![AR8700I Automotive Radar Immunity Interference Test Solution]()
AR8700I Automotive Radar Immunity Interference Test Solution
-
![M8195A 65 GSa/s Arbitrary Waveform Generator]()
M8195A 65 GSa/s Arbitrary Waveform Generator
-
![E8719A Radar Target Solution]()
E8719A Radar Target Solution
Discover resources and insights
Additional resources for automotive radar testing
Related use cases
-
![How to Calibrate Radar Target Simulation Test Setups]()
How to Calibrate Radar Target Simulation Test Setups
Accurate radar sensors testing in a lab or manufacturing environment requires calibrating the radar target simulation setup. Learn how to align and calibrate the over-the-air (OTA) test setup for optimal radar sensors testing.
Learn more
-
![How to Verify Lidar Sensors]()
How to Verify Lidar Sensors
Providing valuable insights into lidar sensors requires target simulation with multiple distance and reflectivity values. Learn how to test lidar sensors for range, accuracy, and field-of-view.
Learn more
-
![How to Validate C-V2X Device Performance]()
How to Validate C-V2X Device Performance
Validating C-V2X device performance requires automotive original equipment manufacturers (OEMs) to perform functional, protocol, and RF measurements against evolving standards. Learn how to set up a test to validate C-V2X device performance of both Uu and PC5 interfaces.
Learn more
Get in touch with one of our experts
Need help finding the right solution for you?