How to Generate an RF Carrier Signal
Generating an RF carrier signal with a signal generator
Generating an RF carrier signal requires a metrology-grade signal generator with excellent distortion and spurious characteristics to ensure high spectral purity. The high-frequency waveform must have a low short-term drift in frequency and low phase noise. It must also be free of spurious and flicker noise. A common method of measuring spectral purity is to measure single-sideband phase noise in a 1 Hz bandwidth versus the offset from the carrier.
To set up the RF signal generator, select the frequency and amplitude from the front panel. The generator will typically operate in default mode. However, there are numerous options to tailor the signal’s performance, depending on the application. The option for low phase noise with a selectable frequency offset may be a priority in a narrow bandwidth communication. Select the signal-to-noise ratio optimization option to minimize the broadband noise.
RF carrier signal source solution
Generating an RF carrier signal with the highest spectral purity requires a metrology-grade signal generator with excellent distortion and spurious characteristics. The Keysight PSG signal generator is an ideal solution for an RF carrier source with low phase noise. The frequency range extends to 67 GHz, and extender modules can generate up to 1.1 THz. With the option to output more than 30 dBm of output power, it is suitable for testing high-power devices and overcoming test system losses.
See demo of RF carrier signal generator
Explore products in our RF carrier signal source solution
-
![E8267D PSG Vector Signal Generator, 100 kHz to 44 GHz]()
E8267D PSG Vector Signal Generator, 100 kHz to 44 GHz
-
![E8257D PSG Analog Signal Generator, 100 kHz to 67 GHz]()
E8257D PSG Analog Signal Generator, 100 kHz to 67 GHz
Discover resources and insights
Additional resources for RF carrier signal generation
Related use cases
-
![How to Test CRPA-Enabled GNSS Receivers]()
How to Test CRPA-Enabled GNSS Receivers
Testing CRPA-enabled GNSS receivers requires a real-time baseband GNSS emulation coupled with the ability to present time-synchronized, phase-coherent signals to the device under test. Learn how to troubleshoot and verify solutions used to mitigate GNSS interference, jamming, and spoofing.
Learn more
-
![How to De-embed Fixtures and Correct Mismatch Errors]()
How to De-embed Fixtures and Correct Mismatch Errors
Minimizing the uncertainty in your measurement setup requires delivering predictable and repeatable signals to your device under test (DUT). Learn how to easily de-embed and match correct test fixtures with a signal generator and an embedded reflectometer.
Learn more
-
![How to Test a Digital Wideband Transceiver]()
How to Test a Digital Wideband Transceiver
Testing digital wideband transceivers requires a hybrid solution combining a signal generator and a network analyzer. Learn how to perform digital RF stimulus response tests while achieving digital-integrated RF front-end characterization.
Learn more
Get in touch with one of our experts
Need help finding the right solution for you?