How to Test USB4 Receiver Compliance

Get quote
High-Performance BERT
+ High-Performance BERT
High-Performance BERT
+ High-Performance BERT

Calibrate and test USB4 receiver performance to USB-IF standards

Testing physical-layer (PHY) USB4 receivers for conformance or compliance requires a USB4 testbed comprised of a BERT, high-bandwidth oscilloscope, receiver test application software, and a USB4 microcontroller test module. The application software automates measurement and test case execution as specified in the USB4 Electrical Compliance Test Specification, as defined by the Universal Serial Bus Implementers Forum (USB-IF).

Precision testbed calibration is required to ensure the device under test passes conformance specification. This requires optimizing the transmitter equalizer and then finely calibrating the bit error ratio tester's (BERT) stress signal using a high-performance oscilloscope. During the receiver test, the BERT injects the stress signals on the lane under test. The test automation software and a USB4 microcontroller test module are used to perform the BER test, which validates whether or not the device under test exceeds the allowance defined by the USB compliance test specification.

Automated USB4 receiver compliance test solution

Automated USB4 receiver compliance test solution

USB4 receiver testing requires precise stress signal calibration and consistently repeatable bit error ratio measurements. The Keysight USB4 receiver test solution comprises the N5991U40A USB4 receiver test software for receiver calibration and testing, running on an M8040A high-performance BERT, a UXR-Series high-performance oscilloscope for signal calibration, a USB4 microcontroller test module, and additional signal integrity software for the oscilloscope.
Get quote

See demo of USB4 receiver compliance testing

Explore products for our USB4 receiver compliance test solution

Related use cases

How to Test USB4 Transmitter Compliance

How to Test USB4 Transmitter Compliance

Testing a USB4 transmitter requires a high-performance real-time oscilloscope to capture and analyze transmitted patterns. Learn how compliance test software automates the test process and provides test results, like margin analysis, to show how much your device passed or failed each test.

Learn more keysight-arrow

How to Test USB4 Version 2.0 Transmitter Compliance

How to Test USB4 Version 2.0 Transmitter Compliance

Testing a USB4 version 2.0 transmitter requires a high-performance real-time oscilloscope to capture and analyze transmitted PAM3 signals. Learn how compliance test software automates the test process and provides test results to show if your device passed or failed each test.

Learn more keysight-arrow

How to Characterize Serial Buses

How to Characterize Serial Buses

Characterizing serial buses in embedded designs requires debugging and correlating data transfers with other mixed-signal interactions. Learn how to debug I2C, SPI, UART, and other serial buses with an oscilloscope.

Learn more keysight-arrow

contact us logo

Get in touch with one of our experts

Need help finding the right solution for you?

Contact us