How to Evaluate FEC Performance for High-Speed Ethernet Links
Validating FEC performance of high-speed Ethernet links
Testing high-speed Ethernet links requires evaluating the error-correction mechanism you are using. The process involves identifying the cause of the errors, which can either be forward error correction (FEC) symbol errors or PCS lane errors generated by port electronics, optical transceivers, or cables. Measurements like pre-FEC bit error rate (BER), FEC symbol density, the number of uncorrectable FEC codewords, and the frame loss ratio are used to determine link health.
The test setup for validating FEC performance of high-speed Ethernet links includes the device under test and a bit error rate tester (BERT) to replace some of the stressed lanes. An optical loopback goes from the device under test to an optical transceiver, but as an alternative, you can use an electrical loopback to the coax interface. For debugging purposes, use a real-time oscilloscope.
FEC analysis solution
See demo of FEC performance analysis
Explore products for our FEC analysis solution
-
![UXR0134A Infiniium UXR-Series Oscilloscope: 13 GHz, 4 Channels]()
UXR0134A Infiniium UXR-Series Oscilloscope: 13 GHz, 4 Channels
-
![M8040A 64 GBaud High-Performance BERT]()
M8040A 64 GBaud High-Performance BERT
-
![G800GE-02 OFSP 2-Port Test System – 941-0086]()
G800GE-02 OFSP 2-Port Test System – 941-0086
Discover resources and insights
Additional resources for forward error correction analysis
Related use cases
-
![How to Measure Frequency Response (Bode Plot)]()
How to Measure Frequency Response (Bode Plot)
Frequency response analysis requires a dedicated network analyzer or an oscilloscope with frequency analysis response software. Learn how to perform a frequency response (Bode plot) analysis using automation software and a benchtop oscilloscope.
Learn more
-
![How to Test USB-C Cable and Connector Compliance]()
How to Test USB-C Cable and Connector Compliance
Ensuring the compliance of the USB4 Type-C standard cables and connectors requires testing the channel operating margin (COM) and high-speed integrated S-parameters. Learn how to perform USB compliance testing based on test specifications set by USB-IF.
Learn more
-
![How to Test USB 2.0 Interface Compliance]()
How to Test USB 2.0 Interface Compliance
USB 2.0 compliance requires an oscilloscope with 2 GHz or higher bandwidth, a dedicated test fixture, and USB 2.0 compliance software. Learn how to test USB 2.0 compliance to ensure interoperability.
Learn more
Get in touch with one of our experts
Need help finding the right solution for you?